Removal Procedure
- Open the rear compartment.
- Pull back the rear compartment center carpet.
- Disconnect the electrical connector (1) from the latch (2).
- Disconnect the manual release cable (4) from the latch (2).
- Remove the rear fascia. Refer to
Rear Bumper Fascia Replacement.
- Mark the location of the latch (2) to aid in installation.
- Remove the nuts (3) attaching the latch (2) to the rear compartment panel.
- Remove the latch (2) from the rear compartment panel.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Position the latch (2) to the rear compartment panel.
- Install the nuts (3) attaching the latch (2) to the rear compartment panel and tighten the nuts to
10 N·m (89 lb in).
- Connect the manual release cable (4) to the latch (2).
- Connect the electrical connector (1) to the latch (2).
- Install the rear fascia. Refer to
Rear Bumper Fascia Replacement.
- Re-position the rear center compartment carpet.
- Close the rear compartment.