For 1990-2009 cars only
Removal Procedure
- Remove the closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.
- Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement.
- Remove the retaining screws from the bottom of the switch pad.
- Pull outward to disengage the retaining clip.
- Disconnect the electrical connectors.
- Remove the retaining screws from the instrument panel (I/P) dimmer switch.
- Remove the I/P dimmer switch.
Installation Procedure
- Install the I/P dimmer switch to the I/P cluster bezel.
- Install the retaining screws to the I/P dimmer switch and tighten to 1.5 N·m (13 lb in).
- Connect the I/P dimmer switch electrical connector.
- Install the retaining screw at the bottom of the I/P dimmer switch pad and tighten to 1.5 N·m (13 lb in).
- Install the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement.
- Install the closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.
Caution: Refer to Fastener Caution in the Preface section.
