For 1990-2009 cars only
Removal Procedure
- Lower the door window.
- Remove the door trim panel. Refer to Door Trim Panel Replacement.
- Disconnect the electrical/audio connector.
- Remove the mirror nut access plugs.
- Disconnect the electrical connector(s).
- Disconnect the coaxial cable and note the routing, if equipped.
- Disconnect the mirror harness from the retainers.
- Remove the fasteners (1) from the mirror studs.
- Remove the mirror with the harness and gasket.
Warning: Refer to Express Down Feature Warning in the Preface section.
Installation Procedure
- Position the mirror with the gasket and harness to the door.
- Install the fasteners (1) to the mirror. Tighten the mirror nuts to 10 N·m (89 lb in).
- Route the harness and secure the harness with the harness retainers.
- Connect the coaxial cable, if equipped.
- Connect the electrical connector(s).
- Install the mirror nut access plugs.
- Reconnect the electrical/audio connector.
- Install the door trim panel. Refer to Door Trim Panel Replacement.
Warning: Refer to Express Down Feature Warning in the Preface section.
Caution: Refer to Fastener Caution in the Preface section.
