GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 XLR 🢒 Driver Information and Entertainment 🢒 Displays and Gages 🢒 Ambient Air Temperature Gage Sensor Replacement

Removal Procedure
  1. Remove the knee bolster. Refer to Driver Knee Bolster Panel Replacement.
  2. Remove the driver information center retaining screw.
  3. Disconnect driver information center from the instrument panel (I/P).
  4. Disconnect the inside air temperature sensor from the driver information center (DIC) bezel.

    5. Object Number: 922611 Size: SH
  5. Disconnect the inside air temperature sensor electrical connector.

Installation Procedure
  1. Connect the inside air temperature sensor electrical connector.

    2. Object Number: 922611 Size: SH

    Note: Ensure that the inside temperature sensor is fully seated into the DIC bezel.

  2. Install the inside air temperature sensor.
  3. Connect driver information center to the I/P.

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the driver information center retaining screw and tighten to 1.9 N·m (17 lb in).
  5. Install the knee bolster. Refer to Driver Knee Bolster Panel Replacement.