GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 XLR 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Sunshade Replacement

Removal Procedure

    Object Number: 1298196 Size: SH
  1. Tilt the sunshade down toward the windshield.
  2. Insert a flat-headed tool under the sunshade bezel at the windshield header.
  3. Remove the sunshade retaining screws.
  4. Remove the sunshade from the windshield header.
  5. Disconnect the electrical connector from the sunshade.

Installation Procedure

    Object Number: 1298196 Size: SH
  1. Install the sunshade to the windshield header.
  2. Connect the harness to the sunshade electrical connector.
  3. Push the connector through the hole into the windshield header.

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the sunshade retaining screws and tighten to 2 N·m (18 lb in).
  5. Rotate the sunshade toward the centerline of the vehicle until the sunshade locks in place.