Front Fog Lamp Bulb Replacement XLR-V
Callout
| Component Name
|
Preliminary ProcedureRemove the front wheelhouse liner in order to access the lamp assembly. Refer to
Front Wheelhouse Liner Replacement.
|
1
| Front Fog Lamp Bulb
Warning: Refer to Halogen Bulb Warning in the Preface section.
Procedure
- Disconnect the electrical connector from the lamp bulb socket.
- Rotate the bulb socket counter-clockwise and remove from the lamp assembly.
|
Front Fog Lamp Bulb Replacement XLR
Removal Procedure
- Remove the wheelhouse panel. Refer to
Front Wheelhouse Liner Replacement.
- Disconnect the front fog lamp electrical connector from the fog lamp bulb/socket.
Warning: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury:
• | Turn off the lamp switch and allow the bulb to cool before changing the bulb. |
• | Leave the lamp switch OFF until the bulb change is complete. |
• | Always wear eye protection when changing a halogen bulb. |
• | Handle the bulb only by its base. Avoid touching the glass. |
• | Keep dirt and moisture off the bulb. |
• | Properly dispose of the used bulb. |
• | Keep halogen bulbs out of the reach of children. |
- Remove the fog lamp bulb/socket from the fog lamp by rotating the bulb/socket counterclockwise (1).
- Remove the fog lamp bulb/socket (1).
Installation Procedure
- Install the bulb/socket (1) to the fog lamp.
- Rotate the bulb/socket clockwise (1) until the bulb/socket is fully seated.
- Connect the front fog lamp electrical connector to the fog lamp bulb/socket.
- Inspect the fog lamp for proper operation.
- Install the wheelhouse panel. Refer to
Front Wheelhouse Liner Replacement.
- Aim the fog lamp. Refer to
Fog Lamp Aiming.