Preliminary Procedures

1. Remove the rear bumper fascia filler. Refer to Bumper Filler Replacement.
2. Remove the rear wheelhouse liner panels. Refer to Rear Wheelhouse Panel Liner Replacement.

1

Rear Bumper Fascia Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

Rear Bumper Fascia Screw (Qty: 4)

Tighten
2 N·m (18 lb in)

3

Rear Bumper Fascia Plastic Retainer (Qty: 5)

4

Rear Bumper Fascia

Procedure

1. Disconnect any electrical connectors as needed.
2. Pull out integral at fascia to fender attachment.