Power Steering Cooler Pipe/Hose Replacement Power Steering Gear to Cooler

Power Steering Cooler Pipe/Hose Replacement Cooler to Power Steering Reservoir

1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement.
2. Remove the fuel injector sight shield. Refer to Intake Manifold Sight Shield Replacement or Fuel Injector Sight Shield Replacement.



3. Compress the clamp and disconnect the power steering cooler pipe/hose from the power steering reservoir.
4. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.



5. Remove the retaining clip (1) and disconnect the power steering cooler pipe/hose from the cooler.



6. Remove the 2 power steering pipe/hose routing bolts.
7. Remove the power steering cooler pipe/hose from the vehicle.

1. Position the power steering cooler pipe/hose to the vehicle.

Caution: Refer to Fastener Caution in the Preface section.




2. Install the 2 power steering pipe/hose routing bolts and tighten to 11 N·m (97 lb in).



3. Connect the power steering cooler pipe/hose to the cooler and install the retaining clip (1).
4. Lower the vehicle.



5. Compress the clamp and connect the power steering cooler pipe/hose to the power steering reservoir.
6. Install the fuel injector sight shield. Refer to Intake Manifold Sight Shield Replacement or Fuel Injector Sight Shield Replacement.
7. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement.
8. Fill and bleed the power steering system. Refer to Power Steering System Bleeding.