For 1990-2009 cars only
Removal Procedure
- Remove the cover from the instrument panel (I/P) electrical center.
- Remove the 4 amplifier retaining screws from the electrical multi-use bracket.
- Remove the amplifier from the bracket.
- Disconnect the electrical leads to the amplifier.
Installation Procedure
- Position the amplifier to the electrical multi-use bracket and connect the electrical leads to the amplifier.
- Install the amplifier to the bracket.
- Install the 4 amplifier retaining screws to the bracket and tighten to 2.5 N·m (22 lb in).
- Install the cover to the I/P electrical center.
- Refer to Control Module References for programming and setup information.
Caution: Refer to Fastener Caution in the Preface section.
