GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Cadillac
🢒
2009
🢒
XLR
🢒
Power and Signal Distribution
🢒
Wiring Systems and Power Management
🢒 Engine Coolant Heater Replacement - Left Side
Removal Procedure
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Disconnect the coolant heater power supply cord (1) from the coolant heater.
Pry outward on the heater retaining clip.
Pull the heater (1) from the engine block.
Installation Procedure
Install the coolant heater (1) into the engine block. The retaining clip should snap into place.
Connect the electrical connector to the coolant heater.
Lower the vehicle. Refer to
Lifting and Jacking the Vehicle
.