Warning: Do not attempt to repair or alter the head impact energy-absorbing material glued to the headliner or to the garnish trims. If the material is damaged, replace the headliner and/or the garnish trim. Failure to do so could result in personal injury.

1. Manually open the folding top as shown in the illustration. Refer to Folding Top Manual Operation.

The distance (A) from the windshield header to the leading edge of the folding top panel is 400 mm (15.75 in).

2. Place a protective covering over the interior of the vehicle and the adjacent body panels.



3. Remove the screws from the retainer
4. Remove the retainer from the folding top.

1. Install the folding top headliner retainer.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the screws to the retainer and tighten to 2.5 N·m (22 lb in).
3. Manually close the folding top. Refer to Folding Top Manual Operation.