GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 XLR 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Driver Seat Rear Panel Bracket Replacement

Removal Procedure

    Object Number: 1248021 Size: SH
  1. Remove the finish panel. Refer to Driver Seat Outer Finish Panel Replacement.
  2. Remove the retaining screws from the rear panel bracket and remove the bracket from the seat.

Installation Procedure

    Object Number: 1248021 Size: SH
  1. Position the rear panel bracket to the seat using 2 small punch tools to locate the bracket holes in the seat frame.
  2. Remove 1 punch tool and install the retaining screw. Do NOT tighten.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Repeat the procedure for the remaining screw and tighten to 2.5 N·m (22 lb in).
  4. Install the finish panel. Refer to Driver Seat Outer Finish Panel Replacement.