For 1990-2009 cars only
Removal Procedure
- Insert a plastic flat-bladed tool at the base of the speaker grille and pry upward to disengage the retaining clips.
- Remove the speaker grille from the seat.
- Remove the screws which retain the speaker to the seat.
- Route the speaker from the seat and disconnect the speaker harness lead.
- Remove the speaker grille retainer.
Installation Procedure
- Install the speaker grille retainer.
- Connect the harness lead to the speaker route the speaker harness lead in the seat.
- Install the 4 screws which retain the speaker to the seat and tighten to 2.5 N·m (22 lb in).
- Align the speaker grille to the seat.
- Carefully push on the speaker grille to engage the retaining clips to the seat.
Caution: Refer to Fastener Caution in the Preface section.
