GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 XLR 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Link Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation.

    3. Object Number: 922511 Size: SH
  3. Using a back-up wrench to prevent the link stud from rotating, remove the stabilizer shaft link nuts from the lower control arms.
  4. Using a back-up wrench to prevent the link stud from rotating, remove the stabilizer shaft link nuts and links from the shaft.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 922511 Size: SH
  1. Using a back-up wrench to prevent the link stud from rotating, install the stabilizer shaft links and link nuts and tighten to 60 N·m (44 lb ft) plus 30 degrees.
  2. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation.
  3. Lower the vehicle.