BENCH SEAT ARMREST REMOVAL PROCEDURE OUTLINED

MODELS: 1985-87 M VANS

The following procedure should be followed to remove the armrest from bucket and bench seats on 1895-87 M Vans.

Removal

Place armrest in the vertical position. Grasp armrest at top and bottom. Push armrest toward seat back and rotate armreat rearward 10-15 degrees. Pull armrest away from seat.

Installation

Reverse removal procedure.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.