Removal Procedure
- Remove the air cleaner. Refer to Air Cleaner Assembly Replacement in Engine Controls.
- Drain the engine coolant.
- Remove the heater hoses. Refer to Heater Hoses Replacement in Heater Hose Replacement.
- Remove the screws that retain the cover to the heater assembly.
- Remove the screws and the straps that retain the heater core to the heater assembly.
- Remove the heater core from the vehicle.
Refer to Cooling System Draining and Filling in Engine Cooling.
Installation Procedure
- Install the heater core to the vehicle.
- Install the screws and the straps that retain the heater core to the heater assembly.
- Install the screws that retain the cover to the heater assembly.
- Install the heater hoses. Refer to Heater Hoses Replacement in Heater Hose Replacement.
- Fill the cooling system. Refer to Cooling System Draining and Filling in Engine Cooling.
- Ensure that no leaks exist in the cooling system.
- Install the air cleaner. Refer to Air Cleaner Assembly Replacement in Engine Controls.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the screws and the straps that retain the heater core to the
heater assembly to 2 N·m (18 lb in).
Tighten
Tighten the screws that retain the cover to the heater assembly to
2 N·m (18 lb in).
