- Remove the key from the
ignition switch.
- Connect the passenger yellow 2-way connector (1) located
under the instrument panel extension.
- Install the Connector Position Assurance (CPA (2) to the
passenger yellow 2-way connector (1) located under the instrument panel
extension.
- Install the instrument panel extension. Refer to Instrument Panel
Extension Replacement in Instrument Panel and Gauges.
- Connect the driver yellow
2-way connector (1) located at the base of the steering column.
- Install the Connector Position Assurance (CPA) to the driver yellow
2-way connector (1) located at the base of the steering column.
- Install the AIR BAG Fuse to the IP fuse block.
- Staying well away from both air bags, turn the ignition switch
to the RUN position.
• | The AIR BAG warning lamp will flash seven times. |
• | The AIR BAG warning lamp will then turn OFF. |
- Perform the SIR Diagnostic System Check if the AIR BAG warning
lamp does not operate as described.