Rear Side Door Upper Roller Bracket Replacement for Chevrolet Astro - 2WD 1998

1. Remove the upper roller bracket garnish molding. Refer to Garnish Molding Replacement - Upper Roller Track .
2. Remove the rubber stopper from the upper roller track.
3. Remove the front cap.
4. Remove the bracket (1) to door bolts (4).



5. Remove the upper roller bracket from the track.

1. Install the upper roller bracket (1) to the track.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the bracket to door bolts (4).

Tighten
Tighten the bolts to 25 N·m (18 lb ft).

3. Install the front cap.
4. Install the rubber stopper to the upper roller track.
5. Install the upper roller bracket garnish molding. Refer to Garnish Molding Replacement - Upper Roller Track .