Body Side Lower Rear Molding Replacement for Chevrolet Astro - 2WD 1998

1. Remove the rear corner extension molding retainers.
2. Remove the rear corner extension molding.
3. Remove the cladding screws.
4. Remove the cladding retainers.
5. Remove the cladding from the body. Refer to Adhesive Retained Cladding Replacement .

1. Install the cladding to the body. Refer to Adhesive Retained Cladding Replacement .

Notice: Refer to Fastener Notice in the Preface section.

2. Install the cladding screws.

Tighten
Tighten the cladding screws to 2 N·m (18 lb in).

3. Install the cladding retainers.
4. Install the rear corner extension molding.



5. Install the rear corner extension molding retainers.