- Inspect the 3rd and 4th
clutch apply plate (653), the fiber plate assemblies (654A), the steel plates
(654B) and the selective backing plate (655) for the following conditions:
- Install the 3rd and 4th
clutch apply plate (653) into the input housing. Index each leg of the apply
plate into the apply ring legs.
Important:
• | Vehicle models with a 2.2L engine have a different clutch plate
stack. |
• | The first steel plate (654B) has the same spline configuration
as the 3rd and 4th clutch apply plate (653). |
- Install the 3rd and 4th clutch plates starting with a fiber plate assembly
(654A) and alternate with a steel plate (654B).
Important: Use the following 3rd and 4th clutch plate installation order only for
vehicle models with a 2.2L engine.
- Install the 3rd and 4th clutch plates in the following order:
| Important: 3rd and 4th clutch steel plate (652) is thinner than the other steel
plates (654B)
|
4.2. | fiber plate assembly (654A) |
4.4. | fiber plate assembly (654A) |
4.7. | fiber plate assembly (654A) |
4.9. | fiber plate assembly (654A) |
4.11. | fiber plate assembly (654A) |
- Install the 3-4 clutch
boost spring assemblies (600) into the input housing.
- Install the 3rd and 4th
clutch selective backing plate (655). Some models may have a chamfer on one
side of the selective backing plate. Install the chamfer side up.
- Install the 3rd and 4th clutch backing plate retainer ring (656).