For 1990-2009 cars only
Removal Procedure
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Loosen the equalizer.
- Disconnect the front cable from the connector at the left rear cable.
- Lower the vehicle.
- Remove the release cable (1) from the lever assembly (2).
- Remove the cowl side panel trim. Refer to Cowl Side Trim Panel Replacement in Interior Trim.
- Remove the lever assembly. Refer to Park Brake Lever Assembly Replacement .
- Remove the step trim plate. Refer to Front Side Door Step Mat Replacement in Interior Trim. Lift the rocker panel trim and peel back the carpet to expose the park brake cable grommet (4).
- Remove the front cable (3). Unclip the cable and pull through the body.
Installation Procedure
- Install the front cable.
- Connect the cable (1) to the lever assembly (2).
- Install the lever assembly. Refer to Park Brake Lever Assembly Replacement .
- Install the cowl side panel. Refer to Cowl Side Trim Panel Replacement in Interior Trim.
- Install the step trim plate. Refer to Front Side Door Step Mat Replacement in Interior Trim.
- Connect the release cable to the lever assembly.
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Connect the cable to the connector at the left rear cable.
- Lower the vehicle.
- Check the adjustment. Refer to Park Brake Cable Service/Adjustment .
| • | Secure the grommet (4) to the body. |
| • | Clip the cable at the kick panel. |
