The detent, the return or the canceling spring is broken, missing, or out of position.

Replace the multifunction turn signal/hazard switch. Refer to Multifunction, Turn Signal and Hazard Switch Replacement - On Vehicle .

The switch mounting screws are loose.

Tighten the screws to the specified torque. Refer to Fastener Tightening Specifications .

The multifunction turn signal/hazard switch is broken.

Replace the multifunction turn signal/hazard switch. Refer to Multifunction, Turn Signal and Hazard Switch Replacement - On Vehicle .

The canceling cam to the canceling spring interference is uneven.

1. Inspect the canceling cam and the switch.
2. Replace the damaged parts. Refer to Steering Column Jacket - Disassemble - Off Vehicle and Steering Column Jacket - Assemble - Off Vehicle .