GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Astro - 2WD 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Receiver Replacement

Removal Procedure
  1. Remove the instrument panel cluster trim plate.
  2. Remove the radio or the instrument panel storage compartment. Refer to Radio Replacement in Entertainment, or Instrument Panel Storage Compartment Replacement in Instrument Panel and Gauges.

    3. Object Number: 296916 Size: SH
  3. Disconnect the remote keyless entry receiver electrical connector.
  4. Remove the screws retaining the control module to the carrier.
  5. Remove the module from the vehicle.

Installation Procedure

    Object Number: 296916 Size: SH
  1. Install the keyless entry control module to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws retaining the control module to the carrier.

    3. Tighten
    Tighten the screws retaining the control module to the carrier to 2  N·m (18 lb in).

  3. Connect the remote keyless entry receiver electrical connector.
  4. Install the radio, or the instrument panel storage compartment to the vehicle. Refer to Radio Replacement in Entertainment, or Instrument Panel Storage Compartment Replacement in Instrument Panel and Gauges.
  5. Install the instrument panel cluster trim plate.
  6. Reprogram the transmitter. Refer to Transmitter Programming .
  7. Verify that the system operates properly.