Did you perform the Wiper/Washer System Check?

--

Go to Step 2

Go to Wiper/Washer System Check

1. Disconnect the front wiper motor and module connector.
2. Place the ignition switch in the RUN position.
3. Place the front pulse wiper/washer switch in the OFF position.
4. Connect a J 39200 from CKT 96 (BRN) cavity E at the front wiper motor and module to ground.

Is battery voltage present?

--

Go to Step 3

Go to Step 4

1. Ensure that the J 39200 is still connected.
2. Disconnect the front pulse wiper/washer switch at the C201 connector.

Is battery voltage present?

--

Go to Step 5

Go to Step 6

Replace the front wiper motor and module Windshield Wiper System Module Replacement .

Is the repair complete?

--

Go to Wiper/Washer System Check

--

Repair the short to battery in CKT 96 (BRN) between the front wiper motor and module and the front pulse wiper/washer switch.

Is the repair complete?

--

Go to Wiper/Washer System Check

--

Replace the front pulse wiper/washer switch Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Turn Signal and Multifunction Switch Assembly - Assemble - Off Vehicle .

Is the repair complete?

--

Go to Wiper/Washer System Check

--