Did you perform the Washer/Wiper System Check?

--

Go to Step 2

Go to Wiper/Washer System Check

1. Disconnect the front wiper motor and module connector.
2. Place the ignition switch in the RUN position.
3. Place the wiper switch in the HI position.
4. Connect a J 39200 from CKT 92 (PPL) cavity D at the front wiper motor and module to ground.

Is battery voltage present?

--

Go to Step 4

Go to Step 3

Use a J 39200 in order to backprobe CKT 92 (PPL) cavity E3 at the front pulse wiper/washer switch C201 connector to ground.

Is battery voltage present?

--

Go to Step 5

Go to Step 6

Replace the front wiper motor and module Windshield Wiper System Module Replacement .

Is the repair complete?

--

Go to Wiper/Washer System Check

--

Repair the open in CKT 92 (PPL) from the front pulse wiper/washer switch to the front wiper motor and module.

Is the repair complete?

--

Go to Wiper/Washer System Check

--

Replace the front pulse wiper/washer switch Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle Turn Signal and Multifunction Switch Assembly - Assemble - Off Vehicle .

Is the repair complete?

--

Go to Wiper/Washer System Check

--