GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Did you perform the Washer/Wiper Rear System Check?

--

Go to Step 2

Go to Wiper/Washer Rear System Check

2

  1. Disconnect rear window wiper/washer module.
  2. Place the ignition switch in the RUN position.
  3. Connect a test lampJ 35616-200 from CKT 391 (GRY) cavity B to ground.
  4. Place the rear window wiper/washer switch in the ON position.

Does the test lamp light?

--

Go to Step 4

Go to Step 3

3

Use a test lampJ 35616-200 in order to backprobe CKT 391 (GRY) cavity D at the rear window wiper/washer switch connector to ground.

Does the test lamp light?

--

Go to Step 5

Go to Step 6

4

Replace the rear window wiper/washer module Liftgate Wiper Motor Replacement .

Is the repair complete?

--

Go to Wiper/Washer Rear System Check

--

5

Repair the open in CKT 391 (GRY) form the rear window wiper/washer switch to the rear window wiper/washer module.

Is the repair complete?

--

Go to Wiper/Washer Rear System Check

--

6

Replace the rear window wiper/washer switch Accessory Switch Replacement .

Is the repair complete?

--

Go to Wiper/Washer Rear System Check

--