Removal Procedure
- Gently pry the rear speaker
grille from the trim panel using a suitable flat-bladed tool.
- Remove the speaker mounting screws.
- Remove the rear speaker from the panel.
- Disconnect the electrical connector.
Installation Procedure
- Connect the electrical
connector.
- Install the rear speaker to the trim panel.
Notice: Refer to Fastener Notice in the Preface section.
- Install the speaker mounting screws.
Tighten
Tighten the speaker mounting screws to 2 N·m (18 lb in).
- Verify component operation.
- Install the rear speaker grille to the trim panel.