Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did the Remote Keyless Entry System Check bring you here? | -- | Go to Step 2 | |
2 | Connect a fused jumper between CKT 1455 (BLK/WHT) cavity 8 at the data link connector (DLC) and ground. Do all of the power door locks lock and unlock? | -- | Go to Step 4 | Go to Step 3 |
3 | Use a fused jumper in order to backprobe between CKT 1455 (BLK/WHT) cavity L at the remote control door lock receiver connector and ground. Do all of the power door locks lock and unlock? | -- | Go to Step 5 | Go to Step 6 |
4 |
Does the transmitter operate all of the remote control functions? | -- | Go to Step 8 | |
5 | Repair the open in CKT 1455 (BLK/WHT) between the remote control door lock receiver and the DLC connector. Is the repair complete? | -- | -- | |
6 | Connect a test lamp J 35616-200 from the remote control door lock receiver CKT 540 (ORN) cavity E and cavity F to ground. Does the test lamp light? | -- | Go to Step 10 | Go to Step 7 |
7 | Repair the open in CKT 540 (ORN) between the remote control door lock receiver and the instrument panel fuse block. Is the repair complete? | -- | -- | |
8 |
Does the known good transmitter operate all of the remote functions? | -- | Go to Step 9 | Go to Step 10 |
9 | Replace the inoperative transmitter with a new transmitter and reprogram it. Refer to Transmitter Programming . Is the replacement complete? | -- | Go to Step 12 | -- |
10 | Replace the remote control door lock receiver. Refer to Receiver Replacement . Is the replacement complete? | -- | Go to Step 12 | -- |
11 | Reprogram the remote control door lock receiver. Refer to Receiver Replacement . Is the reprogramming complete? | -- | -- | |
12 | Reprogram the remote control door lock receiver to the replacement transmitter. Refer to Transmitter Programming . Is the reprogramming complete? | -- | -- |
