Did the Remote Keyless Entry System Check bring you here?

--

Go to Step 2

Go to Remote Keyless Entry System Check

1. Disconnect the remote control door lock receiver.
2. Connect a test lampJ 35616-200 from CKT 540 (ORN) cavity E to CKT 1050 (BLK) cavity N of the remote control door lock receiver.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

1. Replace the remote control door lock receiver. Receiver Replacement
2. Reprogram the replacement remote control door lock receiver to the transmitter. Refer to Transmitter Programming .

Is the Repair complete?

--

Go to Remote Keyless Entry System Check

--

Repair the open in CKT 1050 (BLK) between the remote control door lock receiver and ground G200.

Is the Repair complete?

--

Go to Remote Keyless Entry System Check

--