GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the trim panel. Refer to Door Trim Panel Replacement .
  2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  3. Remove the upper access cover, if equipped.

  4. Object Number: 324176  Size: SH
  5. Remove the lock rods (1) from the lock assembly (1 and 3).

  6. Object Number: 324177  Size: SH
  7. Disconnect the electrical connector from the lock (5).
  8. Remove the lock bolts (1).

  9. Object Number: 324178  Size: SH
  10. Remove the lock from the door (2).

Installation Procedure


    Object Number: 324178  Size: SH
  1. Install the lock to the door (2).
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the lock bolts (1).
  4. Tighten
    Tighten the lock bolts to 9 N·m (80 lb in).


    Object Number: 324177  Size: SH
  5. Connect the electrical connector (5) to the lock.

  6. Object Number: 324176  Size: SH
  7. Install the lock rods (1 and 3).
  8. Install the upper access cover, if equipped.
  9. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  10. Install the trim panel. Refer to Sliding Rear Side Door Trim Panel Replacement .