GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Astro - 2WD 🢒 Body and Accessories 🢒 Seats 🢒 Child Seat Module Replacement

Removal Procedure
  1. Remove the child seat pad. Refer to Child Seat Pad Replacement .

    2. Object Number: 300223 Size: SH
  2. Remove the bolts retaining the child seat module to the rear seat back frame.
  3. Remove the child seat module from the vehicle.

Installation Procedure

    Object Number: 300223 Size: SH
  1. Install the child seat module to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts retaining the child seat module to the rear seat back frame.

    3. Tighten
    Tighten the bolts retaining the child seat module to the rear seat back frame to 26 N·m (19 lb ft).


    Object Number: 300222 Size: SH
  3. Install the child seat pad. Refer to Child Seat Pad Replacement .