Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the system check? | -- | Go to Step 2 | |
2 |
Did the test lamp light? | -- | Go to Step 3 | Go to Step 7 |
3 | Inspect the liftgate lock/unlock release switch. Is the lock function inoperative by the lock/unlock release switch? | -- | Go to Step 4 | Go to Step 5 |
4 | Repair the open in CKT 195 (LT BLU) wire between the liftgate lock/unlock release switch and splice S232. Does the liftgate operate properly? | -- | -- | |
5 |
Does the test lamp light? | -- | Go to Step 6 | Go to Step 7 |
6 | Repair the open in CKT 194 (WHT) between the liftgate lock/unlock release switch and splice S231. Is the repair complete? | -- | -- | |
7 | Use a test lamp J 35616-200 in order to backprobe CKT 640 (ORN) wire cavity D at the liftgate lock/unlock release switch. Did the test lamp light? | -- | Go to Step 8 | Go to Step 9 |
8 | Replace the liftgate lock/unlock release switch. Refer to Liftgate Lock Cylinder Replacement . Is the repair complete | -- | -- | |
9 | Repair the open in CKT 640 (ORN) between the I/P fuse block and the liftgate lock/unlock release switch. Is the repair complete | -- | -- |
