Step
| Action
| Value(s)
| Yes
| No
|
1
| Did you perform the system check?
| --
| Go to
Step 2
| Go to
Endgate Window Release System Check
|
2
|
- Press any of the power door lock switches to the unlock position.
- Disconnect the rear liftgate release motor.
- Use the test lamp J 35616-200
in order to probe CKT 1306 (LT GRN) wire cavity A
at the motor connector to ground.
- Press the liftgate release switch.
Does the test lamp light?
|
| Go to
Step 3
| Go to
Step 6
|
3
|
- Use a test lamp J 35616-200
in order to probe CKT 1450 (BLK) cavity B at the rear liftgate
release motor connector to CKT 1306 (LT GRN) cavity A.
- Press the liftgate release switch.
Does the test lamp light?
|
| Go to
Step 5
| Go to
Step 4
|
4
| Repair the
open in CKT 1450 (BLK) between the rear liftgate release motor and
G403.
Is the repair complete?
|
| Go to
Endgate Window Release System Check
| --
|
5
|
- Replace the rear liftgate release motor. Refer to
Liftgate Lock Cylinder Replacement
.
- Press the liftgate release switch.
Is the repair complete?
|
| Go to
Endgate Window Release System Check
| --
|
6
|
- Use a test lamp J 35616-200
in order to backprobe CKT 1306 (LT GRN) wire cavity C3 at the
liftgate lock/unlock relay to ground.
- Press the liftgate release switch.
Does the test lamp light?
| --
| Go to
Step 7
| Go to
Step 8
|
7
| Repair the open in CKT 1306 (LT GRN) between the rear
liftgate release motor and G403.
Is the repair complete?
| --
| Go to
Endgate Window Release System Check
| --
|
8
|
- Use a test lamp J 35616-200
in order to backprobe CKT 1305 (PPL) wire cavity B2 at the
liftgate lock/unlock relay to ground.
- Press the liftgate release switch.
Does the test lamp light?
| --
| Go to
Step 12
| Go to
Step 9
|
9
|
- Use a test lamp J 35616-200
in order to backprobe CKT 1305 (PPL) wire cavity C of the liftgate
lock/unlock release switch connector to ground.
- Press the Liftgate release switch.
Does the test lamp light?
| --
| Go to
Step 10
| Go to
Step 11
|
10
| Repair the open in CKT 1305 (PPL) between the lock/unlock release
switch and the liftgate lock/unlock relay.
Is the repair complete?
| --
| Go to
Endgate Window Release System Check
| --
|
11
| Replace the liftgate lock/unlock release switch. Refer
to
Liftgate Lock Cylinder Replacement
.
Does the liftgate release switch operate properly?
| --
| Go to
Endgate Window Release System Check
| --
|
12
|
- Disconnect the liftgate lock/unlock relay.
- Use a digital multimeter (DMM) J 39200
in order to probe CKT 1450 (BLK) wire cavity B1 at
the liftgate lock/unlock relay connector to ground.
Is there continuity?
| --
| Go to
Step 14
| Go to
Step 13
|
13
| Repair the open in CKT 1450 (BLK) between the liftgate lock/unlock
relay and G403.
Is the repair complete?
| --
| Go to
Endgate Window Release System Check
| --
|
14
|
- Connect a test lamp J 35616-200
between CKT 295 (GRY) wire cavity A1 of the liftgate lock/unlock
relay and ground.
- Press any of the power door lock switches to the LOCK position.
Does the test lamp light?
| --
| Go to
Step 16
| Go to
Step 15
|
15
| Repair an open in CKT 295 (GRY) between the liftgate lock/unlock
relay and splice S335.
Is the repair complete?
| --
| Go to
Endgate Window Release System Check
| --
|
16
|
- Connect a test lamp J 35616-200
between CKT 294 (TAN) cavity C1 of the liftgate lock/unlock
relay and ground.
- Press any of the power door lock switches to the unlock position.
Does the test lamp light?
| --
| Go to
Step 17
| Go to
Step 18
|
17
| Replace the liftgate lock/unlock relay. Refer to
Body Side Trim Panel Replacement - Right Side
Is the repair complete?
| --
| Go to
Endgate Window Release System Check
| --
|
18
| Repair the open in CKT 294 (TAN) between the liftgate
lock/unlock relay and splice S334.
Is the repair complete?
| --
| Go to
Endgate Window Release System Check
| --
|
