GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 586374  Size: SH

    Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

  1. Disconnect the negative battery cable.
  2. Remove the fuel pressure connection valve cap (3).
  3. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
  4. Use a standard valve core tool in order to remove the valve core (2).

Installation Procedure


    Object Number: 586374  Size: SH
  1. Use a standard valve core tool in order to install a new valve core (2).
  2. Connect the negative battery cable.
  3. Inspect for leaks.
  4. 3.1. Turn the ignition ON for 2  seconds.
    3.2. Turn the ignition OFF for 10 seconds.
    3.3. Turn the ignition ON for 2  seconds.
    3.4. Inspect for fuel leaks.
  5. Install the fuel pressure connection valve cap (3).