Tools Required

J 41240 Fan Clutch Wrench

Caution: To help avoid personal injury or damage to the vehicle, a bent, cracked, or damaged fan blade or housing should always be replaced.

1. Remove the upper fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement .



2. Remove the fan clutch using the J 41240 .
3. Remove the fan and fan blade clutch assembly from the vehicle.
4. Remove the four bolts retaining the fan blade to the fan blade clutch.
5. Remove the fan from the fan blade clutch.

Tools Required

J 41240 Fan Clutch Wrench

1. Install the fan to the fan blade clutch.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the four bolts retaining the fan blade to the clutch.

Tighten
Tighten the bolts to 33 N·m (24 lb ft).

3. Install the fan blade clutch assembly using the J 41240 .

Tighten
Tighten the fan blade clutch assembly to 56 N·m (41 lb ft).

4. Install the upper fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement .