GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Astro - 2WD 🢒 Engine 🢒 Engine Electrical 🢒 Battery Tray Replacement

Removal Procedure
  1. Remove the battery. Refer to Battery Replacement .

    2. Object Number: 334076 Size: SH
  2. Disconnect the VCM retaining clip and position the VCM away from the battery tray.

    3. Object Number: 334074 Size: SH
  3. Remove the battery tray retaining bolts.
  4. Remove the battery tray.

Installation Procedure

    Object Number: 334074 Size: SH
  1. Install the battery tray.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the battery tray retaining bolts.

    3. Tighten
    Tighten the battery tray retaining bolts to 25 N·m (18 lb ft).


    Object Number: 334076 Size: SH
  3. Install the VCM and the VCM retaining clip.
  4. Install the battery. Refer to Battery Replacement .