For 1990-2009 cars only
- Set the wheels in the straight ahead position.
- Set the steering wheel into the locked position.
- Raise the vehicle on one side so that the tire is about 25 mm (1 in) above the floor.
- Position a dial indicator at position (1) (as shown).
- Move the wheel back and forth (2) without moving the steering wheel.
- Inspect all linkage pivots and ball studs for looseness if the gauge reading exceeds the specifications.
- Replace any worn components, as necessary.
Important: Replace damaged or broken steering linkage and components. Do not attempt to repair steering linkage components.
The gauge reading should not exceed 2.74 mm (0.108 in).
