Important: Check for inoperative I/P compartment lamp bulb before beginning diagnostic procedure.

Did you perform the Lighting Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Lighting Systems

1. Disconnect the instrument panel (IP) compartment lamp connector.
2. Measure voltage with DMM from CKT 1732 (ORN) cavity A to the IP compartment lamp connector to ground.

Is the specified voltage present?

B+

Go to Step 3

Go to Step 6

Inspect for an open in CKT 1050 (BLK) between the IP compartment lamp and Ground G200.

Did you find an open?

--

Go to Step 4

Go to Step 5

Repair the open in CKT 1050 (BLK) between the IP compartment lamp and Ground G200.

Is the repair complete?

--

Go to Step 7

--

Replace the IP compartment lamp assembly. Refer to Instrument Panel Storage Compartment Lamp Replacement .

Is the replacement complete?

--

Go to Step 7

--

Repair the open in CKT 1732 (ORN) between the IP compartment lamp and S258.

Is the repair complete?

--

Go to Step 7

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2