For 1990-2009 cars only
Removal Procedure
- Remove the washer hose from the wiper arm.
- Lift the wiper arm assembly from the windshield, then pull the retaining latch.
- Remove the arm assembly from the transmission drive shaft.
Important: Before removing one or both of the arm and blade assemblies, use a suitable marker on the windshield to indicate the proper part position and to aid in reinstallation.
Installation Procedure
- Position the wiper arm assembly on the drive shaft and press in the retaining latch so that the wiper blade aligns with the mark made before the removal.
- Install the washer hose.
