Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Radio/Audio Description and perform the necessary inspections? | -- | Go to Step 2 | |
2 |
Does the test lamp illuminate? | -- | Go to Step 3 | Go to Step 5 |
3 | Connect a test lamp from CKT 1140 (ORN) cavity 10 to CKT 1050 (BLK) cavity 5 at the radio connector C1 to ground. Does the test lamp illuminate? | -- | Go to Step 4 | Go to Step 6 |
4 | Connect a test lamp from CKT 43 (YEL) cavity 9 at the radio connector C1 to ground. Does the test lamp illuminate? | -- | Go to Step 7 | Go to Step 8 |
5 | Repair the open in CKT 1140 (ORN) between the radio and the IP fuse block. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 9 | -- |
6 | Repair the open in CKT 1050 (BLK) between the radio and GND G200. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 9 | -- |
7 |
Did you complete the replacement? | -- | Go to Step 9 | -- |
8 | Repair the open in CKT 43 (YEL) between the radio and the IP fuse block. Refer to Wiring Repairs in Wiring Systems Did you complete the repair? | -- | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
