Did you review the Driver Information Center Description and perform the necessary inspections?

--

Go to Step 2

Go to Diagnostic Starting Point

1. Place the ignition key in the RUN position.
2. Turn the temperature display to the ON position.
3. Press and release the U.S./metric switch twice.

Does the display toggle between the U.S. and the metric display?

--

Go to Diagnostic Starting Point

Go to Step 3

Replace the compass and temperature display module. Refer to Driver Information Center Module Replacement .

Did you complete the replacement?

--

Go to Step 4

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2