Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Driver Information Center Description and perform the necessary inspections? | -- | Go to Step 2 | |
2 | Test drive the vehicle. Does the speedometer operate properly? | -- | Go to Step 3 | |
3 |
Are 1 or more resistance measurements beyond the maximum or the minimum limits? | -- | Go to Step 4 | Go to Step 5 |
4 | Replace the ambient air temperature sensor. Refer to Ambient Air Temperature Sensor Replacement in Body Front End. Did you complete the replacement? | -- | Go to Step 10 | -- |
5 | Inspect for poor connections at the compass and temperature display module. Refer to Testing for Intermittent Conditions and Poor Connections in Wiring Systems. Did you find any poor connections? | -- | Go to Step 8 | Go to Step 6 |
6 | Inspect CKT 389 (DK GRN) for an open. Refer to Circuit Testing in Wiring Systems. Did you find an open? | -- | Go to Step 9 | Go to Step 7 |
7 | Replace the compass and temperature display module. Refer to Driver Information Center Module Replacement . Did you complete the replacement? | -- | Go to Step 10 | -- |
8 | Repair poor connection. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 10 | -- |
9 | Repair open in CKT 389 (DK GRN). Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
