Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Driver Information Center Description and perform the necessary inspections? | -- | Go to Step 2 | |
2 |
Does the display read SC? | -- | Go to Step 4 | Go to Step 3 |
3 | Connect a fused jumper wire from the ambient air temperature sensor CKT 735 (LT GRN/BLK) cavity A to ground. Does the display read SC? | -- | Go to Step 6 | Go to Step 7 |
4 | Inspect for a poor connection at the ambient air temperature sensor connector. Did you find a poor connection? | -- | Go to Step 10 | Go to Step 5 |
5 | Replace the ambient air temperature sensor. Refer to Ambient Air Temperature Sensor Replacement in Body Rear End. Did you complete the replacement? | -- | Go to Step 11 | -- |
6 | Repair the open in CKT 550 (BLK) between the ambient air temperature sensor and ground G105/G107. Did you complete the repair? | -- | Go to Step 11 | -- |
7 | Backprobe a fused jumper from CKT 735 (LT GRN/BLK) cavity D at the compass and temperature display module connector to ground. Does the display read SC? | -- | Go to Step 8 | Go to Step 9 |
8 | Repair the open in CKT 735 (LT GRN/BLK). Did you complete the repair? | -- | Go to Step 11 | -- |
9 | Replace the compass and temperature display module. Refer to Driver Information Center Module Replacement . Did you complete the replacement? | -- | Go to Step 11 | -- |
10 | Repair poor connection at the ambient air temperature sensor connector. Did you complete the repair? | -- | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
