Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Audible Warnings Description and perform the necessary inspections? | -- | Go to Step 2 | |
2 |
Does the KEY IN IGNITION test display NO? | -- | Go to Step 3 | Go to Step 7 |
3 |
Does the PARKLAMPS test display OFF? | -- | Go to Step 4 | Go to Step 8 |
4 | Inspect the connections at the BCM. Refer to Testing for Intermittent Conditions and Poor Connections in Wiring Systems. Are the connections in need of repair? | -- | Go to Step 5 | Go to Step 6 |
5 | Repair the connections as necessary. Refer to Connector Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 9 | -- |
6 | Replace the BCM. Refer to Body Control Module Replacement in Body Control System. Did you complete the replacement? | -- | Go to Step 9 | -- |
7 | Locate and repair the short to ground in CKT 80 between the BCM connector C2 terminal B9 and the key in ignition alarm switch. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 9 | -- |
8 | Are the park lamps ON with the switch OFF? | -- | Go to Diagnostic Starting Point in Lighting Systems | Go to Step 4 |
9 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
