Important: This diagnostic procedure is for side door delay lock inoperative only.
The side door should lock immediately when closed and the power door locks
are activated. To check this function, perform the following steps in
order:
The body control module should re-lock the doors after the 5 second
delay.
Step | Action | Value(s) | Yes | No | ||||
|---|---|---|---|---|---|---|---|---|
1 | Did you perform the Power Door Locks Diagnostic System Check? | -- | Go to Step 2 | |||||
2 | Check for an intermittent with DMM in CKT 775 (PNK) between the side door jamb switch and the body control module. Is there a fault present? | -- | Go to Step 3 | Go to Step 4 | ||||
3 | Repair CKT 775 (PNK) between the side door jamb switch and the body control module? Is the repair complete. | -- | Go to Step 7 | -- | ||||
4 | Check for an intermittent with DMM in the following circuits:
between splices S230 and S316. Is there a fault present? | -- | Go to Step 5 | Go to Step 6 | ||||
5 | Repair the intermittent in one of the following circuits:
between splices S230 and S316. Is the a repair complete? | -- | Go to Step 7 | -- | ||||
6 | Refer to BCM diagnosis for proper operation on side door timer lock feature. Was the customers problem repaired? | -- | Go to Step 7 | -- | ||||
7 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
