GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Use a grease pencil in order to mark the position of the bracket on the door.
  2. Disconnect the lower corner of the door trim panel to expose the bracket (2) to door bolts.
  3. Support the bottom of the door.
  4. Remove the bracket (2) to door bolts.

  5. Object Number: 324150  Size: SH
  6. Slide the bracket (2) out of the rear of the track in order to remove the bracket from the body.

Installation Procedure

  1. Slide the bracket rollers (2) into the rear of the track in order to install the bracket to the body.

  2. Object Number: 324150  Size: SH
  3. Align the bracket with the marks made during removal in order to install the bracket to the door.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the bolts that retain the bracket to the door.
  6. Tighten
    Tighten the bracket retaining bolts to 25 N·m (18 lb ft).

  7. Remove the support from the bottom of the door.
  8. Install the lower corner of the door trim panel by pressing into place until fully seated.