GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Astro - 2WD 🢒 Body and Accessories 🢒 Doors 🢒 Striker Bolt Replacement - Sliding Door Front

Removal Procedure
  1. Remove the shoulder belt guide bolt from the door pillar. Refer to Seat Belt Retractor Replacement - Right Rear .
  2. Pull the trim panel forward and reach behind the trim panel to the striker bolt nut  in order to remove the screw at the bottom of the door pillar trim.

    3. Object Number: 324162 Size: SH
  3. Remove the striker bolt (4).
  4. Remove the striker nut (1).

Installation Procedure
  1. Install the striker nut to the inside of the door pillar.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 324162 Size: SH
  2. Install the striker bolt (4).

    3. Tighten
    Tighten the striker bolt to 67 N·m (49 lb ft).

  3. Install the trim panel to the door pillar and the screw.
  4. Install the shoulder belt guide bolt to the door pillar. Refer to Seat Belt Retractor Replacement - Right Rear .