GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the right hand body side trim panel. Refer to Body Side Trim Panel Replacement - Right Side .
  2. Remove the two bolts that retain the rear storage compartment, if equipped.
  3. Remove the bolts (5).

  4. Object Number: 324165  Size: SH
  5. Remove the striker (4).
  6. Remove the spacer (3).
  7. Remove the washer (2).
  8. Remove the nut plate (1).

Installation Procedure

  1. Install the nut plate (1).
  2. Install the washer (2).
  3. Install the spacer (3).

  4. Object Number: 324165  Size: SH
  5. Install the striker (4).
  6. Notice: Refer to Fastener Notice in the Preface section.

  7. Install the striker bolts (5).
  8. Tighten
    Tighten the striker bolts to 24 N·m (18 lb ft).

  9. Install the right hand body side trim panel. Refer to Body Side Trim Panel Replacement - Right Side .