GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Astro - 2WD 🢒 Body and Accessories 🢒 Interior Trim 🢒 Sunshade Replacement

Removal Procedure

    Object Number: 493903 Size: SH
  1. Remove the sunshade retaining screws, unplug the wiring harness (if equipped).
  2. Remove the sunshade from the vehicle.

Installation Procedure
  1. Install the sunshade to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 493903 Size: SH
  2. Install the sunshade retaining screws, connect the sunshade wiring harness (if equipped).

    3. Tighten
    Tighten the sunshade retaining screws to 2 N·m (18 lb in).