Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover.

1. Remove the C- pillar retaining screw.



2. Use the J 38778 in order to release the fasteners that retain the panel to the vehicle.

1. Install the panel to the vehicle:

1.1.	Align the C- pillar retaining clips with the holes in the body.

1.2.	Press the panel in order to seat the fasteners into place.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the C- pillar retaining screw.

Tighten
Tighten the C- pillar retaining screw to 2 N·m (18 lb in).